As featured on
Stop Wasting $100 Boards on Bad Cuts
Master Your Circular Saw the Same Way Pros Do
❌ "Is this saw going to hurt me with kickback?"
❌ "Why am I wasting so much money on ruined materials?"
❌ "How do pros make these cuts look so easy?"
The circular saw terrifies a lot of people. Some folks avoid using it completely.
Others force themselves to use it but end up with crooked cuts, damaged lumber, or worse - dangerous kickback situations.
I started just like you. When I first picked up a circular saw, it scared the hell out of me too.
The circular saw runs on physics. Simple rules.
Follow them and the saw does exactly what you want. Break them and you're asking for trouble.
You don't necessarily need an expensive table saw or miter saw.
A circular saw can handle nearly any cut they can make - and some they can't!
Once you master it, this single tool replaces thousands of dollars in equipment.
Pro carpenters often bring just a circular saw to entire jobs.
Because when you follow its rules, you get clean, accurate cuts without the fancy setup.
That's why I created a complete training system for mastering your circular saw.
Every technique comes from 20+ years solving real problems on job sites.
Trusted by 18,000 Students
Introducing…
CIRCULAR SAW MASTERY
a step-by-step course that shows you exactly how to use your saw safely and effectively
12 videos showing you:
- How to prevent dangerous kickbacks before it happens
- The real way to cut straight without using guides
- When to lift the blade guard (and when not to)
- Pro-level plunge cutting techniques that save hours
- Quick crosscutting tips for miter saw precision
- Simple ways to adjust every part of your saw
Plus the exact system for making your own track saw guides for under $40 - replacing tools that cost hundreds.
This course gives you the exact same techniques pros use daily - methods that typically take years to learn through experience.
20+ Years of Experience | 930K+ subscribers | 18,000 Happy Students
Here’s Everything You’ll Get Inside Circular Saw Mastery
[Video 1]
JIGSAW VS CIRCULAR SAW:
Stop wondering which saw you really need. See exactly why pros reach for the circular saw first, and when a jigsaw might be the better choice.
[Video 2]
CUT STRAIGHT WITH NO GUIDE:
The ultimate introduction to freehand cutting. Learn the benchmarks of competent carpentry while avoiding the dangerous mishaps that happen when you do it wrong.
[Video 3]
11 WORST CIRCULAR SAW MISTAKES:
Essential safety guide covering everything that can go wrong with circular saws - and how to prevent these problems before they happen.
[Video 4]
ADJUST EVERYTHING ON YOUR SAW:
Master all moving parts work together. These overlooked maintenance tips will maximize your saw's performance and lifespan.
[Video 5]
CROSSCUTTING TIPS:
Use simple hand tools to make your circular saw cuts as accurate as a miter saw. Speed up your work without sacrificing precision.
[Video 6]
CREEPING THE CUT:
The pro technique for lining up cuts quickly and accurately. A technique pros use every day to speed up their work.
[Video 7]
LIFTING THE BLADE GUARD:
Get when (and when not to) lift your blade guard safely. This essential technique makes certain cuts easier and safer, but you need to know the rules.
[Video 8]
PLUNGE CUTTING:
Master safe, accurate plunge cuts in seconds. Stop using dangerous cutting methods and learn how pros make these cuts quickly and safely.
[Video 9]
RIP FENCE TECHNIQUES:
This simple attachment can replace your table saw for many cuts. Learn proper setup and use for fast, accurate rips.
[Video 10]
LONG, CLEAN CUTS
WITH STRAIGHT EDGES:
Get table saw accuracy anywhere. Learn how to make perfectly straight cuts in places where larger saws can't go.
[Video 11]
CUTTING CROSS LAPS:
Advanced techniques for woodworking-type joints in larger lumber. Take your circular saw skills to the next level.
[Video 12]
HOMEMADE TRACK SAW
(EASY HOW-TO!):
The best accessory/jig you could possibly have for your circular saw–a homemade panel guide! It will save you hours of time as you continually carry out projects.
JOIN TODAY AND YOU’LL GET 2 FREE BONUSES:
QUICK GUIDE PDFs: Stop rewinding videos mid-project. These printable guides put every important technique at your fingertips. Keep them in your workshop for quick reference when you need them.
QUICK GUIDE PDFs:
Stop rewinding videos mid-project. These printable guides put every important technique at your fingertips. Keep them in your workshop for quick reference when you need them.
MODERATED COMMENT SECTION ACCESS:
Get your specific questions answered by trade pros, including me. Whether you're troubleshooting a problem or avoiding a costly mistake, we're here to help.
Special 50% Offer Ends in
00
DAYS
00
HOURS
00
MINS
00
SECS
Regular Price: $177
Today Only: $87
Instant Access • 30-Day Money-Back Guarantee
TRY CIRCULAR SAW MASTERY RISK-FREE
Complete 30-Day Money Back Guarantee: Watch the entire course, try the techniques, and if you're not completely satisfied, just email me for a full refund. No questions asked.
- Learn everything in just 2 hours
- Full refund if not satisfied
- Save money on wasted materials
- Master your saw without the years of trial and error
Special 50% Offer Ends in
00
DAYS
00
HOURS
00
MINS
00
SECS
Instant Access • 30-Day Money-Back Guarantee
“This is the perfect video for us who are first timers with a circular saw. I wanted tips for making straight cuts and this delivers.
I also like how you always put a premium on safety and how to avoid accidents. And last but certainly not least, thanks for clear, concise articulation. It does matter how the advice is delivered. Thanks again and have a nice day.”
@shed4287
“I just wanted to say thanks for all that you do. I have learned so much - everything from the magnet/stud trick, to using a 5 in 1 tool, and mastering a circular saw. Your videos are to the point and always full of helpful and practical information. Seriously, thanks!”
@Nicholas-od6fo
"This is the finest and most useful circular saw guide on the internet! and I've watched like 200! Most others are just like take a circular saw, spin the blade to 6000rpm just give a shit and slice up the wood around you, and be a man cut a few fingers and one of your feet too! And they don't even show errors or how to correct them etc"
@colosistvan
"My wife and I bought our first house just a couple of years ago. It was also built in 1920. And boy - it was in rough shape. Your videos were INCREDIBLY HELPFUL in learning about the tools I needed to fix whatever I needed to fix. I was going to Lowe’s almost every other day it seems. Most importantly, you have given me the confidence to handle all these tools. Thank you, Ethan! I am so glad you’re back!"
@cpee656
"I just bought a bunch of power tools, and the first one i needed to use was my new circular saw, your video on 11 mistakes helped me do it right the first time, thanks."
@davidloew2671
A Message from Ethan…
Hey Carpenters,
Twenty years ago, I worked with my dad building custom homes that still stand today.
He taught me carpentry the right way - no shortcuts, no compromises.That same attention to detail went into creating this course.
I've spent two decades in the field, solving real problems on job sites.
Now I share what works with folks who want to build better.
No theory. No fluff. Just proven methods that get results.
The techniques in the Circular Saw Mastery course come from thousands of cuts, hundreds of projects, and countless hours teaching other craftsmen.
They're the same methods I use every day.
Frequently Asked Questions
I can watch YouTube videos for free - why should I pay for this?
What if I've never used a circular saw before?
How long will it take to see results?
Do I need an expensive saw?
Is it really safe to learn saw use online?
What if the course isn't what I expected?
Think About The Real Costs:
- A single ruined piece of lumber due to bad technique
- Replacing a $60-180 saw because of improper use
- Hiring pros for cuts you could do yourself
- Buying a $500+ table saw when your circular saw could handle the job
Plus the hidden costs of learning by trial and error:
- Time wasted on incorrect techniques
- Materials destroyed by kickback and skewed cuts
- Projects delayed by lack of confidence
- Multiple trips to the store for replacement materials
- POSSIBLE SERIOUS INJURY!
Ready to Master Your Circular Saw Today
Here's Everything You'll Get by Joining Now:
✅ Lifetime Access to the Complete Course
- All 12 professional-grade video lessons (plus Bonus Videos!)
- Step-by-step instruction from basics to advanced techniques
- Field-tested methods from 20+ years of carpentry experience
✅ Two Free Bonuses Included:
- Quick Guide PDFs Keep these printable references in your workshop to avoid rewinding videos mid-project.
- Moderated Comment Section Access Get your specific questions answered by trade pros, including Ethan, whenever you need help.
Regular price: $177,00
Today: $87
(Save 50%)
Instant Access • 30-Day Money-Back Guarantee
Special 50% Offer Ends in
00
DAYS
00
HOURS
00
MINS
00
SECS
